Skip to content

Electrical & Fluid Control

Valves & Flow Control Products

A valve is specified by four things: the pressure class, the body material, the seat and seal material, and the way it is operated. Miss any one and the valve may still be the right shape and the wrong product. A ball valve with a PTFE seat in a 200°C line, or a cast iron body on a line that is cleaned with caustic, will fail in service while meeting the dimensional drawing.

Testing is the second half of the specification. API 598 and ISO 5208 define the shell and seat test, and a factory that tests every valve is not the same as one that samples. We ask which test is performed on which valves and what record is issued, because "pressure tested" on its own tells you nothing.

Wenzhou and its surrounding districts produce a very large share of China's industrial valves, particularly ball, gate and butterfly patterns in stainless and carbon steel. The cluster is deep, which means both excellent factories and factories that assemble from bought-in bodies are within a few kilometres of each other.

Category at a glance

Valves & Flow Control

Product types mapped
6
Dedicated sub-pages
4
Reply commitment
1 business day

We supply to your specification. We do not manufacture this category and we do not inspect goods — how quality risk is handled is set out separately.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Coverage

What this family covers

Everything below is supplied, whether or not it has its own page. Linked items have a dedicated page with their own specification detail.

Not listed? The category boundary is a sourcing convenience, not a limit. Describe the item and we will tell you whether it fits.

Specification

What to write down before you ask for an offer

These are the fields that move a valves & flow control quotation. You do not need all of them to start an inquiry — but each one you leave out comes back as an assumption, and the assumption will be the factory's, not yours.

Send these details
  1. 01

    Size and pressure class

    DN or NPS plus Class 150/300/600 or PN16/PN40. Both parts are needed.

  2. 02

    Body and trim material

    WCB, CF8, CF8M, duplex, and the trim (stem, ball, disc) which may be a different grade.

  3. 03

    Seat and seal material

    PTFE, RPTFE, PEEK, metal-seated, EPDM or Viton, chosen against temperature and fluid.

  4. 04

    End connection

    Flanged, threaded, welded or wafer, with the facing standard stated.

  5. 05

    Operation

    Manual lever, gearbox, pneumatic or electric actuator, with the supply and control signal.

  6. 06

    Test standard and record

    API 598, ISO 5208 or EN 12266-1, and whether a test certificate per valve is issued.

  7. 07

    Service conditions

    Fluid, concentration, temperature, and whether the line is subject to cycling or water hammer.

  8. 08

    Certification

    Fire-safe (API 607), fugitive emission (ISO 15848), or a market-specific approval.

Where it goes wrong

What actually causes problems in this category

Specific to valves & flow control, not generic advice. Each of these is something we ask about before a factory is approached.

Pressure class and material are a pair

A Class 300 valve in CF8M and a Class 300 valve in WCB have the same face-to-face dimension and a very different allowable range. Buyers sometimes specify the class and let the material default to what the factory stocks. We quote class and material together, with the temperature limit of the seat material stated, because that limit is usually what actually constrains the application.

The seat material sets the temperature limit

A standard PTFE seat is commonly limited to around 180-200°C; RPTFE and PEEK extend that; metal-seated valves go further, with a lower leakage class. A valve sold as "stainless, 300°C" without a stated seat material is a valve whose limit is unknown. This single field explains most premature valve failures in hot service.

Testing records separate factories

API 598 requires shell and seat tests, and the useful question is whether every valve is tested or a sample is. A factory that tests 100% and issues a record per serial number is doing something different from one that tests the first article. We ask before the order, because a test regime cannot be retrofitted to valves already crated.

Actuators are usually a separate purchase decision

A valve with a pneumatic actuator is two products bolted together, often from two factories, and the interface — ISO 5211 mounting, stem dimensions, torque — is where mismatches happen. We quote the valve and the actuator with the interface confirmed, and we ask for the required torque at the actual differential pressure rather than at the nominal size.

Common questions

Valves & Flow Control — asked often

Answers include what we cannot do, where that is the honest answer.

Do you supply valves with API 598 test certificates?

Where the factory performs the test and issues the record, yes, and we confirm that before quoting. The certificate will be the factory's own, not an independent third-party verification. If your project requires a witness test or a third-party certificate, we can coordinate an inspector you appoint, but we do not perform the inspection ourselves.

What is the difference between a floating and a trunnion ball valve?

In a floating ball valve the ball is held against the downstream seat by line pressure, which is simple and effective at small sizes and moderate pressures. Above roughly 6 inch or at high pressure the force becomes too large, so a trunnion-mounted ball is supported on bearings and the seats move instead. Using a floating design outside its range produces high operating torque and seat damage.

Can valves be supplied with our brand and marking?

Yes, subject to volume and to the factory accepting branding responsibility. Nameplate, body marking and packaging can be produced to your artwork. Where the product carries a certification mark, the certificate usually has to be held by the brand owner, so the branding decision affects the documentation route and is best settled before the first order rather than after.

How do I specify a valve for a line that is cleaned in place?

State the cleaning agent, its concentration and temperature, and the frequency. Caustic and acid cleaning attack both the seat material and the body casting quality, and the specification that survives it is usually a higher-grade stainless with a PTFE or PEEK seat and a fully machined bore. This is a case where the standard industrial valve is the wrong purchase even though it fits.

Valves & Flow Control from China, priced and shipped

Send the specification, a drawing, or a photograph of the part you are replacing. A named person replies within one business day — with what we can confirm and what we still need from you.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.