Mechanical & Motion
Mechanical Components & Transmission
Bearings, gears and couplings are bought against numbers that are often incomplete. A bearing number fixes the boundary dimensions and the type — not the tolerance class, the internal clearance, the cage material or the brand. Two bearings with the same number can differ by a factor of five in calculated life, and both are correctly described.
We treat this as three questions: what are the boundary dimensions, what is the duty, and what is acceptable to the user. The third question is the one buyers skip, and it decides whether a substitute equivalent is acceptable or a repeat failure six months later.
Gears are harder, because they are made to drawing. A drawing that gives module, tooth count and outside diameter but omits profile shift, helix angle or quality grade cannot be quoted accurately, and the factory will fill the gaps with its own assumptions. We check the drawing before it is sent out — corrections at that stage take minutes, and corrections after production cannot be undone.
Category at a glance
Mechanical Components
- Product types mapped
- 7
- Dedicated sub-pages
- 3
- Reply commitment
- 1 business day
- Related sourcing services
- Product SourcingSupplier ComparisonQuality Planning
We supply to your specification. We do not manufacture this category and we do not inspect goods — how quality risk is handled is set out separately.
- 15 product familiesone purchase order
- Exported from NingboEXW / FOB / CIF / DDP
- One specification sheetquoted line by line
- Reply in 1 business dayfrom a named person
Coverage
What this family covers
Everything below is supplied, whether or not it has its own page. Linked items have a dedicated page with their own specification detail.
Not listed? The category boundary is a sourcing convenience, not a limit. Describe the item and we will tell you whether it fits.
Specification
What to write down before you ask for an offer
These are the fields that move a mechanical components quotation. You do not need all of them to start an inquiry — but each one you leave out comes back as an assumption, and the assumption will be the factory's, not yours.
Send these details- 01
Boundary dimensions
Bore, outside diameter and width. For gears: module, tooth count, face width and bore.
- 02
Tolerance and clearance class
Bearing tolerance class and internal clearance (e.g. normal, C3), or gear quality grade to ISO 1328.
- 03
Cage and sealing
Steel, brass or polyamide cage; open, shielded (ZZ) or sealed (2RS).
- 04
Material and heat treatment
Bearing steel grade, case depth and hardness; gear material, case and core hardness.
- 05
Load and speed
Radial and axial load, running speed, and whether the duty includes shock or reversing load.
- 06
Lubrication
Grease type and fill quantity, or oil viscosity and supply method.
- 07
Marking and traceability
Whether the factory will mark your part number on the component, and whether batch traceability is required.
- 08
Mounting interface
For couplings: bore, keyway, shaft spacing and the misalignment the installation actually has.
Where it goes wrong
What actually causes problems in this category
Specific to mechanical components, not generic advice. Each of these is something we ask about before a factory is approached.
Same number, different bearing
An open, normal-clearance bearing in a general-purpose housing and a sealed C3 bearing for a hot application can share one part number in a buyer's spreadsheet. They are not interchangeable in service. We quote the full designation — including suffix codes for seal, clearance and cage — and we ask the factory to confirm that designation back in writing.
Gear drawings fail on the details nobody writes down
Profile shift, helix angle, lead correction, root fillet, quality grade, and the datum used for measurement. If those are missing, every factory will assume something different and the parts will not mesh with the mating gear. We check the drawing set for completeness before RFQ, and where a mating part exists we ask for it to be referenced as the master.
Couplings are chosen for the misalignment you have
A jaw coupling tolerates more misalignment and less torque than a disc coupling of the same size; a gear coupling tolerates the most misalignment and needs lubrication. Buyers regularly choose on shaft diameter alone. Stating the actual shaft spacing, runout and expected thermal growth produces a coupling that lasts instead of one that is replaced annually.
Counterfeit is a distribution problem
For brand-name bearings, the risk sits in the channel, not in the factory. We buy through distribution that can document the chain, and we tell you what documentation we actually obtained. We do not have a laboratory and we do not authenticate bearings — if the application justifies authentication, that is a specialist service.
Common questions
Mechanical Components — asked often
Answers include what we cannot do, where that is the honest answer.
Can you supply bearings with a specific brand?
Yes, through distribution, with the brand warranty. We will also tell you when a brand-name part is not available in the quantity or lead time you need, rather than substituting a different brand silently. Where a generic equivalent is acceptable, it is quoted as a separate line with its stated tolerance class and clearance.
Do you check gears against our drawing?
We review the drawing for the fields a factory needs before quoting, and we raise gaps back to you — missing profile data, an undefined quality grade, or a tolerance that cannot be measured with the stated method. We do not perform dimensional inspection of the finished parts, and we tell you that plainly rather than implying a quality control step we do not provide.
What is the difference between C2, CN and C3 clearance?
Internal clearance is the total gap between rolling elements and raceways before load is applied. C2 is tighter than standard, CN is standard, C3 and C4 are progressively looser. Looser clearance suits higher temperature or interference fits that close the gap in service; using standard clearance in those conditions leads to preload, heat and early failure. The choice belongs in the specification, not in the factory's default.
Can couplings be bored to our shaft sizes?
Yes, and boring is normally done at the factory to the sizes you state, including keyway dimensions and set-screw or clamp arrangement. Once bored, the coupling is no longer returnable, so the shaft measurement should be taken from the actual shafts rather than from a drawing that may have been revised.
Related
How this category is usually bought
Services that apply to mechanical components, and the industries where it is a recurring purchase.
Industries
Industrial Product Sourcing
Find industrial products against a written specification, with comparable supplier quotations and clearly stated requirements.
Learn moreSupplier Comparison & Offer Analysis
Compare supplier offers on the same specification, quantity and delivery basis, with differences and exclusions made clear.
Learn moreSpecification & Quality Planning
Clarify specifications, acceptance requirements and sample approval before ordering. Independent inspection and testing remain with your appointed providers.
Learn moreMechanical Components from China, priced and shipped
Send the specification, a drawing, or a photograph of the part you are replacing. A named person replies within one business day — with what we can confirm and what we still need from you.
We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.