Skip to content

Mechanical & Motion

Fasteners & Hardware

Fasteners look like a commodity and are not. A bolt is defined by its property class, its thread tolerance, its coating and its dimensional standard, and a quotation that says "M10 x 40, zinc plated" has specified none of them. Property class 8.8 and 10.9 bolts of the same size carry very different preload, and a class 10.9 bolt with the wrong plating can fail by hydrogen embrittlement in service.

The other half of the specification is the standard: DIN, ISO, ANSI/ASME and GB define slightly different head dimensions, thread lengths and chamfers for what appears to be the same bolt. Mixing standards within one assembly is how you end up with a socket that does not fit half the bolts on a machine.

Fastener production in China is concentrated in Handan (carbon steel), Ningbo and Wenzhou (stainless and speciality), and Guangdong (small screws and precision). Because the cluster is dense, the range of what a single description can cover is wide — and the difference is usually in material grade and coating thickness rather than in geometry.

Category at a glance

Fasteners & Hardware

Product types mapped
6
Dedicated sub-pages
3
Reply commitment
1 business day

We supply to your specification. We do not manufacture this category and we do not inspect goods — how quality risk is handled is set out separately.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Coverage

What this family covers

Everything below is supplied, whether or not it has its own page. Linked items have a dedicated page with their own specification detail.

Bolts & ScrewsHex, flange, socket and structural bolting.Nuts & WashersHex nuts, nyloc, flat and spring washers.
AnchorsWedge, sleeve and chemical anchors for concrete.
Industrial FastenersStuds, rivets, pins and retaining rings.
Metal HardwareBrackets, hinges, handles and stamped parts.
Custom FastenersNon-standard threads, materials and coatings.

Not listed? The category boundary is a sourcing convenience, not a limit. Describe the item and we will tell you whether it fits.

Specification

What to write down before you ask for an offer

These are the fields that move a fasteners & hardware quotation. You do not need all of them to start an inquiry — but each one you leave out comes back as an assumption, and the assumption will be the factory's, not yours.

Send these details
  1. 01

    Property class or grade

    8.8, 10.9, 12.9 for steel; A2-70 or A4-80 for stainless. This sets the strength.

  2. 02

    Dimensional standard

    DIN 933, ISO 4017, ANSI B18.2.1 or GB, which differ in head and thread length.

  3. 03

    Thread and tolerance

    Metric coarse or fine, 6g/6H class, and whether a thread run-out limit is required.

  4. 04

    Coating

    Zinc plated, hot-dip galvanised, zinc flake, Dacromet, or plain — with thickness specified.

  5. 05

    Material

    Carbon steel, alloy steel, 304, 316, brass or nylon, and whether a certificate is needed.

  6. 06

    Mechanical testing

    Tensile, hardness and proof load, and whether the factory issues a test report per lot.

  7. 07

    Marking

    Head marking with class and brand, and whether your own marking is required.

  8. 08

    Packing

    Bulk, boxed, or kitted by size, and whether barcoded labels are required.

Where it goes wrong

What actually causes problems in this category

Specific to fasteners & hardware, not generic advice. Each of these is something we ask about before a factory is approached.

The class marking is the specification

Property class 8.8 and 10.9 bolts of identical dimensions are not interchangeable, and the head marking is the only visible evidence of which one you have. We ask for the marking requirement explicitly, and for high-strength classes we ask whether the factory can provide a test report per lot — because an unmarked box cannot be verified afterwards.

Coating and strength interact

Electroplated high-strength bolts are exposed to hydrogen embrittlement, which is why class 10.9 and above are usually supplied with zinc flake or mechanically applied coatings rather than acid-pickled electroplating. Specifying 10.9 with ordinary zinc plating is a real and common error, and the failure appears days or weeks after installation.

Stainless fasteners seize

Austenitic stainless bolts gall when tightened dry, particularly with power tools, and the joint then has to be cut apart. A2 and A4 fasteners should be supplied with an anti-seize coating or a suitable lubricant, and the tightening method should account for the difference in friction. This is a specification item, not an installation afterthought.

Standards are not interchangeable at the head

A DIN 933 hex bolt and an ISO 4017 bolt are dimensionally close, but ANSI head widths differ enough that a single socket will not fit both. On an assembly with mixed supply, the workshop notices immediately; on a spare-parts shelf it is discovered during a shutdown. We keep one standard per order unless you specify otherwise.

Common questions

Fasteners & Hardware — asked often

Answers include what we cannot do, where that is the honest answer.

Can you supply fasteners with material certificates?

Yes, where the factory issues them, and typically per lot rather than per piece. For structural or safety-critical applications, we ask for the certificate and the mechanical test report at inquiry stage, because a certificate cannot be created for a lot that has already been packed and shipped. We pass on what the factory issues and tell you what type it is.

What is the usual minimum order quantity?

Standard sizes are often available in single-carton quantities from stock, while non-standard lengths, materials or coatings carry factory minimums that can be substantial. We state the minimum per line. Where the minimum is the obstacle, we will say so and suggest either a stock alternative or consolidating the requirement across sizes.

Do you supply fasteners to our drawing?

Yes. Custom fasteners — non-standard thread, head shape, material or coating — are made to drawing, usually with dedicated tooling for non-standard heads or threads. The approved drawing is the acceptance basis, and we ask the factory to confirm the drawing back before production rather than assuming the interpretation is shared.

How can I tell whether a bolt is really class 8.8?

Visibly, only by the head marking, and marking can be applied to anything. The reliable route is a hardness or proof-load test on a sample from the lot, either by the factory with a report, or by a laboratory you appoint. We do not test fasteners ourselves; where the application justifies verification, we say so and help arrange the sample.

Fasteners & Hardware from China, priced and shipped

Send the specification, a drawing, or a photograph of the part you are replacing. A named person replies within one business day — with what we can confirm and what we still need from you.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.