Skip to content

Logistics

Sea Freight (FCL & LCL)

Full container or shared container, from Ningbo and Shanghai. The default choice for industrial goods where weight per container matters more than transit time.

Sea freight is the default for industrial goods because it moves the greatest weight per container, and because most industrial cargo is not in a hurry. The decisions that matter are container utilisation, loading plan and which port pair actually serves your destination — not the headline figure per container.

The FCL versus LCL decision is where most shipments are made or broken. LCL is charged per cubic metre with minimums and additional handling at both ends, which means a heavy or awkward consignment can work out worse in LCL than in a container. The break-even is not a fixed volume; it depends on the cargo and the route.

Trade terms

EXW / FOB / CIF / DDP

Every quotation names the term and the point at which risk transfers.

This page covers

  • FCL versus LCL: when the break-even falls, and why LCL often surprises buyers on heavy goods
  • Container types and when an open-top or flat-rack is actually necessary
  • Loading plans: how weight distribution and packing affect what fits
  • Port-to-door versus port-to-port, and what each excludes
  • Transit time ranges by destination region, with the variables that move them

What decides the shipment

Three things that decide what actually happens

Handling, ownership and timing explain most of the gap between what a buyer expects and what actually arrives.

LCL charges are not linear

LCL is built from a minimum charge, a per-cubic-metre rate and destination handling that is charged per shipment rather than per cubic metre. At the small end the fixed items dominate; on heavy cargo the weight-to-volume ratio can push a shipment past FCL earlier than buyers expect.

Loading plan decides what fits

A 40HQ holds roughly 67 cubic metres in theory and considerably less in practice once pallets, stacking limits and loading access are accounted for. Machines that cannot be stacked, cartons that cannot bear load, and cargo that must be braced all reduce the usable volume. We ask for the stacking constraint, not just the volume.

Transit time is a range, not a number

Port-to-port transit is the sailing; door-to-door adds booking cut-off, loading, vessel delays, berthing queues, clearance and inland delivery. Quoting the sailing time as a delivery date is the most common source of disappointed expectations, and it is avoidable by quoting the range and the variables.

Process

From factory door to arrival

Each step has an owner. Where the owner is you or your forwarder, that is stated — we coordinate, we do not take over responsibilities that legally sit elsewhere.

  1. 01

    Decide FCL or LCL on the cargo, not the volume alone

    Volume, weight, stackability and destination charges together decide it. We compare both where the answer is not obvious, because on heavy goods the obvious option is often not the one the volume suggests.

  2. 02

    Confirm container type and loading plan

    Standard, high cube, open top or flat rack, with a loading sequence that respects weight distribution and bracing. Oversized machinery needs this settled before production finishes, not after.

  3. 03

    Book and load

    Space is booked against the confirmed cargo data, and loading is supervised with photographs taken at the factory or at our facility. Photographs are the evidence base if a damage claim is ever needed.

  4. 04

    Documents and arrival

    The bill of lading is issued against the shipper's instructions, and the arrival notice triggers destination charges and clearance. We check the document set against the order before it is released.

Fit

When this mode suits — and when it does not

The second column is the useful one. A supplier who says a mode is wrong for your cargo has saved you money.

Suits

  • Heavy or bulky industrial goods
  • Orders above roughly 15 cubic metres, where FCL usually wins
  • Buyers with flexible delivery windows

Does not suit

  • Urgent spare parts where days matter more than anything else
  • Very small volumes where LCL minimum charges dominate

Common questions

Sea Freight — asked often

At what volume does FCL overtake LCL?

There is no universal figure, but for general cargo the crossover usually falls somewhere between 12 and 15 cubic metres, and earlier for heavy goods because LCL is charged on both volume and weight. We will run both calculations on your actual cargo rather than quoting a rule of thumb.

Can you ship machinery that does not fit in a standard container?

Yes, using open top or flat rack containers, or breakbulk where the dimensions exceed those. Each option changes the handling at both ports, the insurance basis and the loading plan, so it should be decided before the machine is built — the factory can often design for disassembly if they know at the start.

Who is responsible for damage during the voyage?

Risk passes according to the incoterm and is covered by whichever party insured the cargo. We arrange marine insurance where the shipment is ours to arrange, and we provide loading photographs. A survey and a claim are handled by the insurer's surveyor, not by us.

Send the cargo data and we will quote the route

Package dimensions, weights, pickup location, destination and the ready date. With those five things a shipping quotation is firm rather than an estimate.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.