Skip to content

Valves & Flow Control Products

Gate Valves

Rising-stem and non-rising-stem gate valves, OS&Y and bolted bonnet patterns, in cast iron, cast steel and stainless, for isolation duty on liquid lines. The gate opens fully out of the flow path, which gives very low pressure drop when open and no throttling ability when partly open.

Gate valves are isolation valves, and using them for control is one of the most common application errors in industrial piping: the partly open gate vibrates against its guides and erodes the seat. If the line needs modulation, a globe or control valve is the right purchase.

Rising and non-rising stem, OS&Y pattern.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Gate Valves has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Stem type

    Rising or non-rising, which changes the clearance needed above the valve.

  2. 02

    Bonnet

    Bolted bonnet, welded bonnet, or pressure seal for high classes.

  3. 03

    Wedge type

    Solid, flexible or split wedge, and whether the line may see thermal distortion.

  4. 04

    Body material

    Cast iron for utility water, WCB or CF8M for process duty.

  5. 05

    Trim

    Stem, wedge and seat ring material, which may differ from the body.

Common questions

Gate Valves — asked often

For the wider category context, see Valves & Flow Control Products.

Can a gate valve be used to regulate flow?

It should not be. The gate is supported only at its guides when partly open, so flow-induced vibration erodes the seat and the disc, and the valve may chatter. Gate valves are for open or closed. If you need throttling, a globe valve or a control valve with a characterised trim is the correct choice.

Rising or non-rising stem?

Rising stem shows valve position by the stem height and keeps the threads out of the process fluid, but needs vertical clearance. Non-rising stem suits buried or space-constrained installations. Where the valve is in a pit or under a platform, that clearance decides the choice more than any performance difference.

Gate Valves to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.