Site, Safety & Custom
Packaging & Material Handling Supplies
Export packaging is the least glamorous line in an import programme and the first thing cut when an order is under pressure. A carton specified by burst strength and edge crush test behaves very differently from one specified by "five-layer", and a pallet that has not been heat treated will be refused at the destination border regardless of how well it was made.
The two regulatory items are ISPM 15 for solid wood packaging and the destination's labelling requirements. Both are binary: either the marking is correct and the shipment moves, or it is not and the goods sit at the port. Neither can be fixed after the container has sailed, which is why the packaging specification belongs in the purchase order rather than in the forwarder's instructions.
Zhejiang and Guangdong supply most of China's export packaging, with corrugated production widely distributed and pallet manufacturing near the ports. Because it is a commodity, the range of actual quality at the same nominal specification is wide, and the test report is the only way to compare.
Category at a glance
Packaging & Handling
- Product types mapped
- 6
- Dedicated sub-pages
- 0
- Reply commitment
- 1 business day
- Related sourcing services
- Product SourcingMulti-SupplierOrder Management
We supply to your specification. We do not manufacture this category and we do not inspect goods — how quality risk is handled is set out separately.
- 15 product familiesone purchase order
- Exported from NingboEXW / FOB / CIF / DDP
- One specification sheetquoted line by line
- Reply in 1 business dayfrom a named person
Coverage
What this family covers
Everything below is supplied, whether or not it has its own page. Linked items have a dedicated page with their own specification detail.
Not listed? The category boundary is a sourcing convenience, not a limit. Describe the item and we will tell you whether it fits.
Specification
What to write down before you ask for an offer
These are the fields that move a packaging & handling quotation. You do not need all of them to start an inquiry — but each one you leave out comes back as an assumption, and the assumption will be the factory's, not yours.
Send these details- 01
Carton grade
Flute type (B, C, BC), board combination, and the edge crush or burst test value.
- 02
Internal dimensions
Measured to fit the product with the cushioning, not the product alone.
- 03
Cushioning and protection
Foam, moulded pulp, air pillows, VCI for metal, desiccant for humid routes.
- 04
Pallet specification
Size, entry type, load rating, and ISPM 15 heat treatment with the marking applied.
- 05
Labelling and marking
Shipping marks, barcodes, handling symbols, and the language required.
- 06
Stacking and load
Static and dynamic stacking strength, and the height the container will be loaded to.
- 07
Test requirement
Drop test, compression test, or a protocol such as ISTA 1A or 3A.
- 08
Moisture protection
Polybag, VCI, desiccant quantity, and whether the route is tropical or winter.
Where it goes wrong
What actually causes problems in this category
Specific to packaging & handling, not generic advice. Each of these is something we ask about before a factory is approached.
ISPM 15 is not optional and not universal
Solid wood packaging — pallets, crates, dunnage — must be heat treated or fumigated and marked under ISPM 15 to enter most countries. Plywood and processed board are normally exempt, which is why some suppliers switch to presswood pallets. The marking must be genuine; a stencil applied without treatment is a customs offence at destination.
Specify the test, not the layer count
Five-layer board can be weaker than three-layer board of a better grade. Edge crush test (ECT) and burst strength are the comparable figures, and a factory that quotes only layer count is not giving you a specification. For anything fragile or heavy, a compression or drop test result is worth more than a datasheet claim.
The best packaging is the one that arrives intact
Damage rates are rarely measured by buyers, so the consequence of poor packaging stays invisible until a customer complains. A carton upgrade measured against a 2% damage rate is usually the better purchase, and the calculation only appears if the damage rate is tracked. We ask what the product is and how it will be handled, not just what size box is needed.
Consolidation changes the packaging requirement
Goods that will be repacked at our facility do not need export-grade cartons at the factory, provided they survive the domestic leg. That is a genuine advantage, but it depends on the repacking actually happening. Where goods are shipping direct, the factory carton is the export carton and must be specified as such.
Common questions
Packaging & Handling — asked often
Answers include what we cannot do, where that is the honest answer.
Can you supply ISPM 15 compliant pallets?
Yes: heat-treated pallets with the IPPC marking applied by a registered producer, and the treatment certificate available on request. Presswood and plywood pallets are normally exempt from ISPM 15, which is often the simpler route. We confirm the marking requirement for the destination country, because enforcement and accepted alternatives differ.
What carton strength do I need for a sea shipment?
It depends on the weight, the stacking height in the container, the humidity of the route and the handling. As a starting point, heavy industrial goods are usually specified on edge crush test rather than layer count, with a compression margin for six weeks in a humid container. A drop or compression test on a sample is the reliable way to settle it.
Can packaging be printed with our brand?
Yes. Printing plates are one-off tooling, so short runs are relatively more demanding. For multi-language markets, the printing has to be decided per market — either separate print runs or a neutral design with applied labels. We quote both where the volume makes the comparison meaningful.
Do you supply warehouse racking and handling equipment?
Yes: selective racking, shelving, bins and handling equipment, though for load-bearing structures the installation design should be produced or approved by a qualified engineer in your jurisdiction. We supply to a specification; we do not certify structural adequacy for your building, and we will say so rather than implying otherwise.
Related
How this category is usually bought
Services that apply to packaging & handling, and the industries where it is a recurring purchase.
Industries
Industrial Product Sourcing
Find industrial products against a written specification, with comparable supplier quotations and clearly stated requirements.
Learn moreMulti-Supplier Procurement
Coordinate purchasing across multiple suppliers, bringing goods together in Yiwu for a consolidated shipment.
Learn moreOrder Management & Coordination
Track agreed order milestones, coordinate supplier updates and prepare purchasing information for shipment.
Learn morePackaging & Handling from China, priced and shipped
Send the specification, a drawing, or a photograph of the part you are replacing. A named person replies within one business day — with what we can confirm and what we still need from you.
We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.