Skip to content

Valves & Flow Control Products

Ball Valves

One-piece, two-piece and three-piece ball valves in floating and trunnion designs, full bore and reduced bore, from 1/4 inch to 24 inch in stainless, carbon steel and brass. The three-piece pattern is the maintenance-friendly choice because the body can be split without cutting the line.

Full bore or reduced bore changes both the flow coefficient and the stated capacity, and buyers often compare offers without noticing which was quoted. We state the bore type on every line so that two quotations describe the same valve.

Floating and trunnion, 1PC to 3PC, full bore.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Ball Valves has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Bore type

    Full bore or reduced bore, with the resulting Cv.

  2. 02

    Body style

    1PC, 2PC or 3PC, and whether in-line maintenance is needed.

  3. 03

    Ball and stem material

    CF8M body with 316 ball and stem, or a higher grade for corrosive service.

  4. 04

    Seat material

    PTFE, RPTFE, PEEK or metal, against the operating temperature.

  5. 05

    End connection

    Threaded, flanged, welded or tri-clamp, with the standard stated.

Common questions

Ball Valves — asked often

For the wider category context, see Valves & Flow Control Products.

When should I choose a trunnion valve?

Generally above 6 inch, or at high pressure in smaller sizes, because the operating torque of a floating ball becomes impractical and the seat load becomes uneven. Trunnion valves also suit actuated service where a predictable torque matters. Below those thresholds a floating design is simpler and adequate.

Can ball valves be repaired rather than replaced?

In the three-piece pattern, yes: seats and seals are replaceable with the body split, which is why process plants standardise on it. In one-piece and two-piece bodies, the valve is usually replaced as a unit. If the line is difficult to isolate, the repairable pattern is worth specifying.

Ball Valves to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.