Mechanical & Motion
Hydraulic & Pneumatic Components
Fluid power components are bought against an interface, not a description. A hydraulic pump with the correct displacement and the wrong mounting flange will not bolt to your bell housing. A valve with the correct function and the wrong port thread will not connect to anything on site. The specification that decides whether the part works is the one that defines what it attaches to.
This is also the category with the highest rate of look-alike product. Model numbering systems, colour schemes and housing shapes are copied closely enough that a photograph proves nothing about origin. We quote what the factory states on the nameplate and in the drawing, and we keep "same as the brand you named" separate from "equivalent specification" instead of letting the two blur together in a quotation.
Wenzhou and Ningbo carry most of China's hydraulic volume, with Ningbo and Yueqing strong on pneumatics and fittings. For anything in a safety-related circuit — holding valves, pilot-operated check valves, brake circuits — the useful questions are about test records and traceability, not about the number in the quotation.
Category at a glance
Hydraulics & Pneumatics
- Product types mapped
- 7
- Dedicated sub-pages
- 3
- Reply commitment
- 1 business day
- Related sourcing services
- Product SourcingSupplier ComparisonOrder Management
We supply to your specification. We do not manufacture this category and we do not inspect goods — how quality risk is handled is set out separately.
- 15 product familiesone purchase order
- Exported from NingboEXW / FOB / CIF / DDP
- One specification sheetquoted line by line
- Reply in 1 business dayfrom a named person
Coverage
What this family covers
Everything below is supplied, whether or not it has its own page. Linked items have a dedicated page with their own specification detail.
Not listed? The category boundary is a sourcing convenience, not a limit. Describe the item and we will tell you whether it fits.
Specification
What to write down before you ask for an offer
These are the fields that move a hydraulics & pneumatics quotation. You do not need all of them to start an inquiry — but each one you leave out comes back as an assumption, and the assumption will be the factory's, not yours.
Send these details- 01
Displacement, bore or flow
cm³/rev for pumps and motors, bore and stroke for cylinders, nominal flow for valves.
- 02
Pressure rating
Continuous and peak, stated separately. A component rated for 250 bar continuous is not the same as one rated 250 bar peak.
- 03
Mounting standard
SAE A/B/C two-bolt, ISO, CETOP/NG, or a flange drawing. This is the field that decides whether the part fits.
- 04
Port thread
BSPP, BSPT, NPT, SAE JIC or metric. Threads are not interchangeable and adapters add a leak path.
- 05
Seal material
NBR, FKM, PTFE or EPDM, chosen against the actual fluid rather than the default.
- 06
Fluid and viscosity range
Mineral oil, water-glycol, biodegradable ester. The wrong seal for the fluid is a guaranteed early failure.
- 07
Filtration class
The cleanliness code the component expects. Most premature hydraulic failures are contamination, not wear.
- 08
Duty cycle
Continuous, intermittent, or pressure-holding. Holding pressure at a port is a different thermal duty from cycling.
Where it goes wrong
What actually causes problems in this category
Specific to hydraulics & pneumatics, not generic advice. Each of these is something we ask about before a factory is approached.
The mounting standard is the compatibility contract
Buyers often send a photograph of the old unit and ask for the same thing. A photograph shows the shape, not the flange pattern, the shaft key, the pilot diameter or the port orientation. We ask for the nameplate data and the mounting drawing, because those are the four dimensions that decide whether the replacement installs without modification.
Equivalent is a claim, not a grade
A factory that says "equivalent to Rexroth" has made a statement about form and fit, not about service life, contamination tolerance or test records. We present both options separately: the original-brand part where it is available, and the equivalent with its stated pressure rating, seal material and warranty. Which one is right depends on the circuit, not on the offer alone.
Seals decide the service life
The same cylinder sold with NBR seals fails in weeks on a biodegradable fluid or in a cold-store application, and the failure gets blamed on the cylinder. Seal compound, temperature range and fluid compatibility belong in the specification, and a factory that cannot state them is not quoting a complete part.
Hose assemblies are a pressure-test question
A hose is a certified assembly, not a length of tube with fittings crimped on. We ask for the burst rating, the crimp specification and the marking on the assembly. For high-pressure or safety-related lines, an unmarked assembly with no test record is not acceptable.
Common questions
Hydraulics & Pneumatics — asked often
Answers include what we cannot do, where that is the honest answer.
Can you match an existing part by model number only?
Sometimes, and we will tell you when it is not enough. A model number usually identifies a series and a displacement or size, but not the mounting, port thread, seal material or options. We send the nameplate details and any drawing you have back to the factory for confirmation, and we quote the confirmed configuration rather than the number alone.
Do you supply original-brand components or equivalents?
Both, quoted separately so the choice is yours. Original-brand parts are sourced through distribution and carry the brand warranty. Equivalents are quoted with their stated pressure rating, seal material and mounting standard, so you can judge whether the substitution is acceptable for that circuit. We do not present an equivalent as the original.
How do you handle the risk of counterfeit components?
By buying through channels that can document the chain. For brand-name parts we ask for the distributor invoice and the packaging details, and we tell you which of those we were able to verify. We do not have a laboratory and we do not authenticate parts — if authentication matters for the application, it should be done by the brand or a qualified third party.
Can cylinders be made in a non-standard stroke?
Yes. Stroke, mounting style, rod end thread and port position are the usual custom fields, and most Chinese cylinder factories build to order rather than from stock. Lead time increases with non-standard seals or coatings, and the drawing should be confirmed before production because a stroke change after machining cannot be corrected.
Related
How this category is usually bought
Services that apply to hydraulics & pneumatics, and the industries where it is a recurring purchase.
Industrial Product Sourcing
Find industrial products against a written specification, with comparable supplier quotations and clearly stated requirements.
Learn moreSupplier Comparison & Offer Analysis
Compare supplier offers on the same specification, quantity and delivery basis, with differences and exclusions made clear.
Learn moreOrder Management & Coordination
Track agreed order milestones, coordinate supplier updates and prepare purchasing information for shipment.
Learn moreHydraulics & Pneumatics from China, priced and shipped
Send the specification, a drawing, or a photograph of the part you are replacing. A named person replies within one business day — with what we can confirm and what we still need from you.
We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.