Custom Fasteners
Non-standard threads, special head shapes, extended lengths, and fasteners in materials or coatings outside the catalogue: titanium, duplex stainless, Monel, PTFE-coated, or with a captive washer. These are made to drawing, usually with a tooling charge for a non-standard head or thread, and the approved drawing is the acceptance basis.
Custom fasteners are driven by tooling and setup rather than by material, so the first order carries most of the setup work and repeat orders are far simpler if the tooling is retained. It is worth confirming who holds the tooling and for how long, because a supplier change later without the tooling means the tooling has to be made again.
Part of
Fasteners & HardwareNon-standard threads, materials and coatings.
Other types in this category
- 15 product familiesone purchase order
- Exported from NingboEXW / FOB / CIF / DDP
- One specification sheetquoted line by line
- Reply in 1 business dayfrom a named person
Specification
What to write down before you ask for an offer
Custom Fasteners has its own set of fields — these are the ones that decide whether a quotation is comparable.
Send these details- 01
Drawing
Fully dimensioned with tolerances, thread specification and surface finish.
- 02
Material and class
Grade, heat treatment, and the mechanical property required.
- 03
Coating
Type, thickness, and any friction coefficient requirement for assembly.
- 04
Tooling ownership
Who holds the dies or tooling, and the retention period.
- 05
Inspection basis
Which dimensions are critical, and what the factory will report.
Common questions
Custom Fasteners — asked often
For the wider category context, see Fasteners & Hardware.
What is the minimum order for a custom fastener?
It is set by the tooling and setup, so it varies with the head shape and thread. For a standard hex head in a non-standard length the minimum can be modest; for a cold-formed special head it is usually in the tens of thousands. We state the factory minimum and the tooling charge separately so you can see what is one-off and what is per unit.
Can our brand be marked on the head?
Yes, with a marking die, usually as part of the tooling. Head marking is how a fastener is traced back to its maker, so if your brand appears on the head you become the responsible party for the property class claim. That is a decision worth taking deliberately, particularly for structural or safety applications.
Related services
How we actually handle a custom fasteners inquiry
Custom Fasteners to a written specification, delivered
Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.
We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.