Nuts & Washers
Hex nuts, nylon-insert lock nuts, weld nuts, flange nuts, and flat, spring, tab and structural washers, matched to the bolt class and the application. Nut property class is matched to bolt class — a class 8 nut on a class 10.9 bolt moves the failure point into the nut, which is rarely the intended design.
Washers are usually bought as an afterthought and matter more than their size suggests: hardness relative to the bolt, and whether the washer is a load-spreading flat washer or a locking device, change the joint behaviour. A soft washer under a high-strength bolt simply deforms and loses preload.
Part of
Fasteners & HardwareHex nuts, nyloc, flat and spring washers.
Other types in this category
- 15 product familiesone purchase order
- Exported from NingboEXW / FOB / CIF / DDP
- One specification sheetquoted line by line
- Reply in 1 business dayfrom a named person
Specification
What to write down before you ask for an offer
Nuts & Washers has its own set of fields — these are the ones that decide whether a quotation is comparable.
Send these details- 01
Nut class
Class 8, 10, 12, or A2/A4 for stainless, matched to the bolt.
- 02
Locking type
Nylon insert, all-metal prevailing torque, or serrated flange.
- 03
Thread
Coarse or fine, tolerance class, and whether the nut is to be matched to a specific bolt lot.
- 04
Washer type and hardness
Flat, spring, tab or structural (F436 / EN 14399), with hardness specified.
- 05
Coating
Matching the bolt coating to avoid galvanic or friction mismatch.
Common questions
Nuts & Washers — asked often
For the wider category context, see Fasteners & Hardware.
Do nuts need to be the same class as the bolts?
They need to be matched so the joint fails in the intended mode. The usual convention pairs a class 8 nut with an 8.8 bolt and a class 10 nut with a 10.9 bolt. A lower-class nut will strip before the bolt reaches preload; an unnecessarily higher-class nut adds nothing.
When is a spring washer appropriate?
Spring washers are widely used and weakly evidenced as a locking device, particularly on hard joints and with vibration. Where vibration loosening is a real risk, a prevailing-torque nut, a thread-locking compound or a properly specified washer face is more reliable. If the joint is safety-related, the locking method deserves a deliberate decision rather than a default.
Related services
How we actually handle a nuts & washers inquiry
Nuts & Washers to a written specification, delivered
Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.
We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.