Skip to content

Fasteners & Hardware

Bolts & Screws

Hex head, flange, socket head, structural and machine screws in carbon steel, alloy steel and stainless, from M3 to M36 and equivalent inch sizes. The range is defined by three standards families — DIN/ISO, ANSI/ASME and GB — and the differences between them are small enough to be missed and large enough to matter.

For structural bolting, the specification extends beyond the bolt: the assembly includes the nut and washer, and the tensioning method (torque, turn-of-nut or tension calibrator) assumes a defined friction coefficient. Buying bolts and nuts from different sources can void that assumption, which is why structural sets are usually purchased together.

Hex, flange, socket and structural bolting.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Bolts & Screws has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Size and length

    Diameter, pitch and length, with the length definition per the standard.

  2. 02

    Property class

    4.8, 8.8, 10.9, 12.9, A2-70, A4-80, and the marking that goes with it.

  3. 03

    Head and drive

    Hex, flange, socket, pan, countersunk, with the standard number.

  4. 04

    Thread length

    Full thread or partial thread, which differs between DIN and ISO for the same size.

  5. 05

    Coating

    Zinc flake, hot-dip, electroplated, or plain, with thickness and friction coefficient.

Common questions

Bolts & Screws — asked often

For the wider category context, see Fasteners & Hardware.

Are DIN and ISO hex bolts interchangeable?

Functionally for many applications, dimensionally not exactly. Head height, width across flats and thread length can differ, and mixed stock creates fitting problems. If your assembly drawings reference DIN, specify DIN; substituting ISO because it is in stock is the kind of change that surfaces during a maintenance shutdown.

What coating should high-strength bolts have?

For class 10.9 and above, a coating that does not involve acid pickling and electroplating — zinc flake systems are the usual choice, because they avoid the hydrogen embrittlement risk. If electroplated high-strength bolts are supplied, they should be baked after plating, and the factory should confirm that. This is a question worth asking before the order, not after a failure.

Bolts & Screws to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.