Skip to content

Hydraulic & Pneumatic Components

Cylinders

Hydraulic and pneumatic cylinders, from ISO-standard mill-type and tie-rod patterns to compact and custom-stroke units. Most Chinese cylinder production is built to order: bore and stroke are standard parameters, while mounting style, rod end, cushioning, port position and seal compound are configuration choices.

The configuration is where lead time and complexity move. A standard ISO cylinder in a common bore ships from stock; a cylinder with a non-standard mounting plate, stainless rod and FKM seals for a high-temperature cell is a small engineering project. Both are legitimate — the difference has to be visible in the quotation, not discovered at delivery.

Hydraulic and pneumatic cylinders in custom strokes.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Cylinders has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Bore and stroke

    In millimetres, plus the required thrust or pull force at your working pressure.

  2. 02

    Mounting style

    Clevis, flange, foot, trunnion or custom plate, with hole pattern if non-standard.

  3. 03

    Rod end

    Thread size and type, and whether a rod eye or spherical bearing is needed.

  4. 04

    Cushioning

    Adjustable cushioning at one or both ends, and the load the cushion must absorb.

  5. 05

    Seals and fluid

    NBR, FKM or PTFE against the actual fluid and ambient temperature range.

  6. 06

    Working pressure

    Continuous and peak, plus whether the cylinder holds load for long periods.

Common questions

Cylinders — asked often

For the wider category context, see Hydraulic & Pneumatic Components.

Can you supply cylinders to a drawing?

Yes, and for non-standard mountings a drawing is the only reliable way to quote. We ask for the mounting interface dimensions, the stroke, the rod thread and the seal requirement. The factory returns a drawing for your approval before production, and that approved drawing is what the order is judged against.

What causes cylinder seal failure most often?

In our experience, fluid and temperature mismatch rather than mechanical wear: NBR seals in an application that needed FKM, or a cylinder specified for mineral oil installed on a water-glycol system. Stating the fluid and the ambient temperature range at inquiry stage avoids most of it.

Cylinders to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.