Skip to content

Pipes, Tubes & Fittings

Pipe Fittings

Elbows, tees, reducers, caps and crosses in butt-weld, threaded and socket-weld patterns, in carbon steel, stainless and alloy grades. Butt-weld fittings to ASME B16.9 are the standard industrial item; forged threaded and socket-weld fittings to ASME B16.11 cover smaller high-pressure lines.

The buying risk in fittings is dimension and wall-thickness conformance, because a fitting that is 2mm short in the centre-to-end dimension will not align with a prefabricated spool. We ask for the dimensional standard and, for critical spools, for the factory to confirm centre-to-end dimensions against it.

Elbows, tees, reducers and caps.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Pipe Fittings has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Dimensional standard

    ASME B16.9, B16.11, B16.28 or EN 10253, stated by number.

  2. 02

    Material grade

    Matching the pipe: A234 WPB, A403 WP316L, or the equivalent.

  3. 03

    Size and wall

    Nominal size and schedule, and whether the bore must match the pipe ID.

  4. 04

    End preparation

    Bevelled for welding, threaded, or socketed.

  5. 05

    Certificate

    Mill certificate with heat numbers traceable to the fitting marking.

Common questions

Pipe Fittings — asked often

For the wider category context, see Pipes, Tubes & Fittings.

Do fittings need to match the pipe schedule?

For butt-weld fittings, yes in practice: the wall thickness at the bevel should be close to the pipe wall so the weld does not have an internal step. ASME B16.9 fittings are dimensioned to match standard schedules, but a Schedule 80 fitting on a Schedule 40 line is a mismatch. We ask for the pipe specification whenever we quote fittings.

Can fittings be supplied with 100% dimensional inspection reports?

Some factories will provide dimensional reports on request, particularly for large or critical spools. It is a factory self-inspection document, not an independent verification, and we describe it that way. If an independent inspection is required, that is arranged separately with an inspector you appoint.

Pipe Fittings to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.