Skip to content

Pipes, Tubes & Fittings

Flanges

Weld neck, slip-on, blind, threaded, lap joint and socket-weld flanges to ASME B16.5, B16.47 and EN 1092-1, in carbon, stainless and alloy steel, from 1/2 inch to 60 inch and pressure classes 150 to 2500.

The two fields that cause the most installation failures are the facing type and the pressure class: an RF flange against an FF gasket, or a Class 150 flange against a Class 300 valve, will bolt together and will not seal. We confirm both, plus the bolt hole pattern, before quoting.

Weld neck, slip-on, blind and threaded flanges.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Flanges has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Standard and class

    ASME B16.5 Class 150/300/600, or EN 1092-1 PN16/PN40.

  2. 02

    Facing

    Raised face, flat face, ring joint or tongue and groove, with the finish.

  3. 03

    Material

    A105, A182 F316L, or the specified grade with its certificate.

  4. 04

    Bore and hub

    For weld neck: pipe schedule so the bore matches the pipe ID.

  5. 05

    Coating and marking

    Anti-rust treatment, and whether heat number marking on the flange is required.

Common questions

Flanges — asked often

For the wider category context, see Pipes, Tubes & Fittings.

Can Class 150 and PN16 flanges be bolted together?

They are close in pressure rating but not identical in bolt circle, bolt size or facing dimensions, so the pairing is unreliable and generally not acceptable. Adapters exist but add a joint. The right approach is to fix one standard for the whole system, which is a decision worth taking at the design stage rather than at the purchasing stage.

Are ring joint flanges needed for high pressure?

Ring joint facings are used where the joint must hold at high pressure or high temperature, because the metal ring seals against a groove rather than relying on gasket compression. They require the matching gasket and groove, and they are less forgiving of misalignment. Whether they are required follows from the design conditions, not from preference.

Flanges to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.