Skip to content

Mechanical Components & Transmission

Bearings

Deep groove ball, angular contact, self-aligning, cylindrical, tapered roller, spherical roller and needle bearings, in open, shielded and sealed variants. China produces the full range, from general-purpose electric-motor bearings to precision spindle sets, and the difference between them is in grinding quality, steel cleanliness and heat treatment rather than in the drawing.

For a buyer, the practical split is between bearings where a generic part is fine — low-speed, light-load, non-critical — and bearings where it is not. That split is decided by duty and consequence of failure, which is why we ask what the bearing is in before quoting a grade.

Deep groove, tapered, spherical and needle bearings.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Bearings has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Full designation

    Basic number plus suffix codes for seal, clearance and cage, e.g. 6205-2RS-C3.

  2. 02

    Tolerance class

    P0, P6, P5 or P4 as required by the application, not by habit.

  3. 03

    Internal clearance

    C2, CN, C3 or C4, chosen against temperature rise and fit.

  4. 04

    Lubrication

    Grease type, fill percentage, and whether relubrication is possible in service.

  5. 05

    Application and duty

    Radial and axial load, speed, and the consequence of a seizure.

Common questions

Bearings — asked often

For the wider category context, see Mechanical Components & Transmission.

How do I know if a substitute bearing is acceptable?

By asking what happens if it fails. On a light-duty conveyor pulley, a generic bearing with the correct clearance is a reasonable choice. On a machine spindle, a crusher or a motor driving a critical process, the consequence of a failure dominates any difference in the specification. We quote both grades where both exist so the decision is explicit.

Can you supply mounted bearing units and housings?

Yes: pillow block, flanged and take-up units with cast iron or pressed steel housings, plus separate housings for shaft assemblies. For these, the shaft diameter and the mounting hole spacing are the dimensions that matter, and we confirm both because housing dimensions vary between patterns that share a nominal size.

Bearings to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.