How to Prepare an Industrial RFQ
An RFQ is not a request for a number. It is the document that determines whether the quotations you receive can be compared — or only sorted by price.
Most buyers judge an RFQ by whether it produced quotations. A better measure is whether it produced quotations that can be compared.
If three suppliers return three prices for what turn out to be three different scopes, the RFQ has failed at its only job. The prices are not comparable, the lowest is not necessarily the cheapest, and the difference will surface later as a change order or a quality dispute.
This guide sets out what an industrial RFQ needs in order to produce comparable offers.
The five blocks of a usable RFQ
1. Identity and context. Who is asking, what the part or product is for, and what happens if it does not work. A supplier who understands the application quotes differently from one who sees only a drawing.
2. Technical requirement. The specification, in a form that can be quoted against and later verified.
3. Commercial requirement. Quantity, delivery point, trade term, target date, and payment terms.
4. Quality and documentation. What must be inspected, what records must accompany the goods, and what standards apply.
5. Process. Deadline for quotation, expected decision date, and who to contact with questions.
Most failed RFQs are missing block 4 entirely and are vague in block 3.
Technical requirement: specificity that can be checked
What “specific” means depends on the product:
- Standard parts — designation or boundary dimensions, plus the execution details that the designation does not fix: tolerance class, clearance, material grade, finish, coating.
- Fabricated items — drawing with revision number, material grade and standard, thickness, welding standard, surface treatment, and tolerances that matter.
- Custom machined parts — drawing with revision, material, critical dimensions flagged, surface finish, heat treatment, and the datum scheme.
- Assemblies — a bill of materials with a source for each line, plus the assembly drawing.
Two rules apply across all of them:
- Name the standard, not just the grade. “Stainless steel” is not a specification; “316L to the stated ASTM or EN grade, pickled and passivated” is.
- State what is critical. If a dimension or property must not vary, say so. If it is free, say that too — otherwise every supplier will apply a different assumption and the prices will diverge for reasons unrelated to price.
Where a value is genuinely unknown, mark it as unknown and ask for a recommendation. This is better than filling in a plausible number, because the supplier will quote against the number and the assumption will disappear into the price.
Quantity and the shape of the order
Quantity affects price in ways that are not linear, and the RFQ should make the intended order structure visible:
- First order quantity and expected repeat quantity, stated separately. A supplier pricing a one-off and a supplier pricing a recurring order are quoting different businesses.
- Batch size and delivery schedule, if the order will be called off over time.
- Packaging requirement — export carton, pallet, marking, and any restriction on mixed pallets.
A supplier who receives only “1000 pcs” will assume one delivery, one packaging method and one production run. If the reality is four deliveries of 250 with retail-ready packaging, the quotation is for a different job.
Trade term and delivery point
The trade term decides what the price includes, and it is the most common source of quotation mismatch.
- EXW — the buyer collects. The price excludes inland transport, export clearance and loading.
- FOB — the supplier delivers to the named port and clears export. The price includes inland transport and export documentation, and excludes freight.
- CIF / CFR — the price includes ocean freight to the destination port (and insurance, for CIF).
- DDP — the price includes import clearance, duties and delivery to the buyer’s door.
Two quotations at different trade terms are not comparable, and comparing them produces a decision that reverses once freight is added. The RFQ should state the required term explicitly, and the quotation should state the term it used in the same words.
Alongside the term, state the destination — port or address — because freight and clearance costs depend on it.
Inspection and documentation
This block is the one most often left out, and it is the one that determines whether the goods can be accepted.
Questions the RFQ should answer in advance:
- What will be inspected? Dimensions, material certificate, functional test, visual and marking.
- Who performs the inspection? Supplier’s own, a third party appointed by the buyer, or a witnessed test.
- What records must be supplied? Mill certificate, dimensional report, test report, packing list, certificate of origin.
- What is the acceptance criterion? A standard, a drawing tolerance, or a sampling plan.
- What happens on non-conformance? Rework, replacement, concession, or rejection.
A supplier who is not told that a mill certificate is required will not supply one, and the goods will be held at the port or rejected at the factory gate. That cost is created by the RFQ, not by the supplier.
Timeline and what happens next
State the quotation deadline and the decision date. Suppliers who know a decision date schedule capacity; suppliers who do not, deprioritise the enquiry.
Also state what the buyer will do after receiving quotations: clarify, negotiate, request samples, or place an order. A supplier who expects a negotiation will price with margin for it; a supplier who expects a direct order may quote tighter.
Common RFQ defects
- No quantity structure — a single figure that hides the real order shape.
- Trade term omitted — quotations arrive on different bases.
- Specification by name — “brass fitting” or “stainless bracket”, with no grade.
- Drawing without revision — two suppliers quote two different versions.
- No inspection requirement — the buyer discovers the gap at receiving.
- No destination — freight cannot be quoted, so it is estimated.
- Deadline omitted — the enquiry sits behind more urgent work.
A short template
- Company, contact, and the application in two sentences.
- Item description, specification or drawing reference with revision.
- Quantity: first order, annual or repeat expectation, batch sizes.
- Required trade term and destination.
- Required delivery date, and whether partial shipments are acceptable.
- Inspection and documentation requirements.
- Packaging and marking requirements.
- Quotation deadline and decision date.
- Statement of what is not yet decided.
That last line does more for quotation quality than any other single item. A supplier who knows which parts of the requirement are still open will quote the firm parts firmly and flag the rest, instead of pricing an assumption.
Ready to put a requirement together? The request a quote form captures the fields above in a structured form, and supplier comparison covers what happens once the quotations arrive.
Key Takeaways
- The purpose of an RFQ is comparability — quotations that differ in scope cannot be ranked by price.
- Quantity, trade term and delivery point change the number more than the supplier does.
- Inspection and documentation requirements must be stated before quoting, not negotiated after.
- Recording what you did not specify is as important as recording what you did.
Related industrial products
Product families and types covered by this guide. Each links to the specifications we ask for before quoting.
Build-to-drawing parts, where the RFQ is the only thing standing between a quote and a rework.
Turned, milled and 5-axis parts to drawing — a category where drawing control decides the outcome.
Related sourcing services
Where this topic turns into an actual order.
Related articles
How to Source Industrial Products from China
The difficulty is rarely finding a supplier. It is establishing which of the companies presenting themselves as manufacturers actually are, and whether the specification survives to delivery.
How to Consolidate Multiple Industrial Purchases from China
Buying from six factories is not six shipments. Consolidation turns them into one — but only if the collection dates, the inspection points and the packing plan are set before the orders are placed.
Bearing Selection for Electric Motors
An electric motor loads its bearings in ways the shaft drawing does not show: magnetic pull, thermal growth along the shaft, and shaft currents on driven equipment.