Skip to content

Custom Industrial Parts & OEM Products

CNC Machined Parts

Turned, milled, mill-turn and 5-axis parts in aluminium, steel, stainless, brass, titanium and engineering plastics, from prototype quantities to production runs. CNC machining is the route that needs no tooling, which makes it the right choice for low volumes, complex geometry and parts that are still being iterated.

The economic crossover is quantity. Above a few thousand pieces a year, casting, forging or stamping usually wins once tooling is amortised, provided the geometry allows it. A buyer who stays on machining for a mature part because the first quote was acceptable is usually carrying a permanent handicap.

Turned, milled and 5-axis parts to drawing.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

CNC Machined Parts has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Drawing and model

    2D drawing with tolerances plus a STEP file, at a stated revision.

  2. 02

    Material and condition

    Grade, temper, and whether a mill certificate is required.

  3. 03

    Tolerances

    General tolerance standard plus any specific or geometric tolerances.

  4. 04

    Surface finish

    Ra value, and the treatment: anodising, passivation, plating, painting.

  5. 05

    Quantity and repeatability

    Prototype, pilot or production volume, and the expected annual usage.

Common questions

CNC Machined Parts — asked often

For the wider category context, see Custom Industrial Parts & OEM Products.

Can a factory work from a STEP file alone?

They can machine to the model, but the tolerances and the critical features are not in the model, so the quote will carry assumptions. For anything functional, a drawing with tolerances is the safer basis, and for a first article it is essential. We can help turn a model into a drawing, but the drawing still needs your approval as the design authority.

How do I decide between machining and casting?

By volume, geometry and tolerance. Machining needs no tooling and holds tight tolerances economically at low volume; casting needs tooling and wins at higher volume, with looser as-cast tolerances usually followed by machining on critical features. The break-even is specific to the part, so we ask for the annual quantity and let the factories quote both routes where both are viable.

CNC Machined Parts to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.