Skip to content

Metals & Industrial Materials

Stainless Steel

Austenitic 304 and 316L in sheet, plate, bar, tube and fittings, plus duplex, ferritic and heat-resistant grades. Stainless is the category where "304" is treated as a complete specification when it is only a family name: finish, tolerance, carbon content and intergranular corrosion resistance all vary within it.

The two practical traps are finish and certification. A 2B finish and a No.4 brushed finish are different products with different corrosion behaviour, and a 304 supplied to a domestic GB grade may not satisfy an EN 10088-2 order without a specific certificate. For anything in contact with food, potable water or chloride service, those details decide acceptability.

304 / 316L sheet, tube, bar and fittings.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Stainless Steel has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Grade

    304, 304L, 316L, 321, 2205 duplex, with the standard (ASTM A240, EN 10088-2).

  2. 02

    Form and finish

    Sheet, plate, bar, tube; 2B, BA, No.4, No.8 or 2D finish.

  3. 03

    Thickness and tolerance

    Nominal plus the allowable minus tolerance, which varies by mill and width.

  4. 04

    Certificate

    EN 10204 3.1 with chemistry, and intergranular corrosion test where required.

  5. 05

    Application environment

    Chloride exposure, temperature, and whether welding will be followed by pickling.

Common questions

Stainless Steel — asked often

For the wider category context, see Metals & Industrial Materials.

Is 304 suitable for a marine environment?

Generally not for sustained chloride exposure. 304 is prone to pitting and crevice corrosion in salt-laden air, and 316L is the usual minimum, with duplex grades for more demanding service. The correct choice depends on chloride concentration and temperature, not on a general rule, so the environment should be described in the inquiry.

What is the difference between 2B and BA finish?

2B is cold rolled, annealed and pickled with a matte, slightly reflective surface and is the general-purpose finish. BA is bright annealed in a controlled atmosphere, giving a highly reflective surface with better corrosion resistance and is used for appearance or hygiene-critical parts. BA is a more demanding finish and is not always available in every thickness.

Stainless Steel to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.