Skip to content

Electrical & Electronic Products

Industrial Sensors

Inductive and capacitive proximity sensors, photoelectric sensors, pressure and level transmitters, encoders and safety switches. The Chinese sensor market ranges from fully sealed IP67 units with ceramic-faced sensing coils to unbranded assemblies that fail on the first washdown.

For sensors, reliability is decided by the environment more than by the electronics: washdown, weld spatter, coolant mist, vibration, and the length of cable run to the PLC. Specifying the sensing distance alone is how a marginal sensor becomes a downtime event.

Proximity, photoelectric, pressure and level sensors.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Industrial Sensors has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Sensing principle and range

    Inductive, capacitive, photoelectric, ultrasonic, and the nominal sensing distance.

  2. 02

    Output type

    NPN or PNP, NO or NC, 3-wire or 2-wire, and the PLC input it must match.

  3. 03

    Supply voltage

    10-30VDC, 24VDC or AC two-wire, with the tolerance range.

  4. 04

    Housing and IP rating

    M8 to M30 barrel, block, or slot type; IP67 minimum for washdown.

  5. 05

    Connection

    Cable length and material, or M8/M12 connector, and whether a quick-disconnect is needed.

  6. 06

    Environment

    Coolant, weld spatter, ambient temperature, and any ATEX requirement.

Common questions

Industrial Sensors — asked often

For the wider category context, see Electrical & Electronic Products.

NPN or PNP — which do I need?

It depends on the PLC input card, not on preference. PNP (sourcing) is the European default and switches the positive side; NPN (sinking) switches the negative and is common on Asian equipment. A mismatch will either not work or work inverted, so the PLC input type should be stated in the inquiry rather than assumed.

Why do proximity sensors fail early in machine-tool applications?

Usually because the sensing face is attacked by coolant or chips, or the cable is flexed continuously at the gland. Extended-range sensors with a protective face, and cable with a higher flex rating, are the ones that survive that environment. Stating the coolant type and the cable movement at inquiry is what allows that choice to be made.

Industrial Sensors to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.